Skip to main content
Service Category

Electrical Services

Experiencing electrical issues like tripping breakers or dimming lights? We provide expert diagnostics and safe repairs to restore your home's power.

Trusted Electrical Troubleshooting and Repair in Southwest Florida

Are you dealing with breakers that constantly trip, a faint burning plastic smell near the hallway panel, or living room lights that dim every time a heavy appliance kicks on? These are active electrical faults that require professional diagnostics, not a DIY guess with a roll of electrical tape. Jackson Total Service has been fixing dangerous electrical issues across Southwest Florida since 1964, and our licensed electricians are ready to get your home's power running safely again today.

Electrical Panel Upgrades & Replacement

A breaker panel with scorch marks, heavy rust, or double-tapped circuits is a system running on borrowed time. When we open up a panel in a Southwest Florida home, we often see the toll that coastal humidity and heavy loads take on the main bus bar. Homeowners usually notice the warning signs when a breaker refuses to stay reset or the metal box itself feels physically warm to the touch. We also frequently encounter outdated Zinsco or Federal Pacific panels that are notorious for failing to trip during an overload, creating a massive fire hazard.

Signs you need a panel inspection or upgrade:

  • Breakers that frequently trip or won't reset
  • Faint buzzing or crackling sounds from the breaker box
  • Rust and corrosion on the metal bus bar or breakers
  • Insufficient capacity for modern appliances
  • The presence of a recalled panel brand

Diagnosing these issues requires stripping off the dead front cover, testing the voltage drop across the main lugs, and checking the integrity of the grounding system. If the panel is undersized or damaged, a full replacement is the only safe path forward. We handle the entire process, including pulling permits and coordinating the utility disconnect. Upgrading the panel is often the first step before scheduling an AC Installation & Replacement to ensure your system can handle the new load.

Whether you need a single bad breaker swapped or a complete heavy-up, our Electrical Panel Upgrades & Replacement team handles every call safely across Southwest Florida.

Electrical Lighting & Ceiling Fan Installation

Installing a ceiling fan or modern lighting fixture requires proper structural bracing and precise wiring to prevent wobbling, flickering, and drywall damage. In our climate, ceiling fans are essential for managing indoor comfort and keeping air moving. Yet, one of the most common calls we get is from a homeowner whose DIY fan installation is wobbling violently or making a relentless ticking noise. On the lighting side, we constantly see flickering recessed LEDs, which usually points to incompatible dimmer switches or sloppy wiring connections inside the ceiling junction box.

Common Installation Pitfalls We Fix

  • Fans hung on standard light fixture boxes that cannot support the dynamic weight
  • Improperly balanced fan blades causing violent wobbling and motor wear
  • Incompatible dimmer switches causing LED fixtures to flicker or hum
  • Loose wire nuts in the junction box creating arcing risks

The mechanical reality is that ceiling fans require a specifically rated, braced junction box to handle the vibration of the motor. When we arrive, we evaluate the existing ceiling boxes, fish new wire if necessary, and ensure the load is properly balanced on the circuit. Doing it right means zero flickering, zero drywall damage, and zero electrical shorts. If we find burnt wires during the install, we can immediately pivot to Electrical Wiring & Rewiring to resolve the hazard.

Trust your fixtures to the professionals and explore our Electrical Lighting & Ceiling Fan Installation coverage for your next home upgrade.

Electrical Surge Protection & Lightning Arrestors

A cheap plastic power strip will not save your expensive appliances when a Southwest Florida lightning strike or grid surge hits your home. Our local power grid frequently experiences micro-surges and massive voltage spikes during afternoon storms. Most homeowners think a basic strip from the hardware store is enough protection for their home theater or computer. But those strips do absolutely nothing to save your air conditioning compressor, smart refrigerator, or hardwired lighting systems when a massive surge travels down the main utility line.

What a whole-home surge protector defends:

  • HVAC compressors and sensitive electronic control boards
  • Smart home hubs and hardwired security systems
  • Kitchen appliances like smart refrigerators and electric ranges
  • Computers, televisions, and expensive entertainment systems

When we inspect homes after a surge event, the damage is usually systemic, resulting in fried control boards and melted GFCI receptacles. The solution is installing a whole-home surge protector directly at the main electrical panel. These devices act as a pressure relief valve, intercepting the voltage spike and shunting it directly into the home's grounding system.

We test your main grounding rod to ensure the protector has a clear path to earth, acting as an invisible shield for your property. This is a crucial addition to any Electrical Panel Upgrades & Replacement project.

Defend your home's sensitive electronics with our complete Electrical Surge Protection & Lightning Arrestors solutions.

Electrical Wiring & Rewiring

Degraded or outdated wiring is a silent threat hiding behind your drywall, responsible for persistent burning smells and blown fuses. In older homes across the region, we frequently encounter cloth-insulated wiring that has turned brittle and crumbles to the touch. We also see aluminum wiring from the 1970s that expands and contracts, causing loose connections and extreme fire risks at the outlets. Symptoms of wiring failure include getting a slight shock when you touch a metal appliance, or specific rooms that constantly trip breakers no matter what is plugged in.

How We Diagnose Wiring Faults

  • Testing insulation resistance with megohmmeters to find voltage leaks
  • Tracing circuits back to the main panel to identify severed or chewed wires
  • Inspecting attic spaces for rodent damage to non-metallic sheathed cable
  • Checking for dangerous aluminum wiring connections at switches and receptacles

When we troubleshoot wiring issues, we don't just guess where the fault lies. If a rat chewed through a wire in the attic, we can pinpoint it and splice in a safe, code-compliant repair. However, if your home's wiring insulation has fundamentally deteriorated, bad wiring isn't something you can patch with electrical tape.

Pulling new, modern copper cable through the walls is a major job, but it is the only way to guarantee your home won't suffer an electrical fire. If we find burnt receptacles during the inspection, we will handle the Electrical Outlet & Switch Repair at the same time.

Ensure your home is safe and up to code by reviewing our Electrical Wiring & Rewiring services.

Electrical Outlet & Switch Repair

A wall outlet that won't hold a plug or a light switch that crackles when flipped is an active electrical fault that needs immediate attention. Over time, the internal metal contacts inside switches and receptacles lose their tension. We see a lot of failures caused by backstabbed outlets, a cheap installation method where wires are simply pushed into the back of the device rather than securely wrapped around the screw terminals. This inevitably leads to loose connections, dangerous arcing, and melted plastic housing.

Signs of a failing switch or receptacle:

  • Plugs fall out of the outlet under their own weight
  • Crackling or popping noises when flipping a switch
  • The plastic faceplate feels warm to the touch or shows brown scorch marks
  • GFCI outlets in the kitchen or bathroom refuse to reset

Our diagnostic process for dead outlets involves tracing the circuit back to the panel to ensure we aren't dealing with a severed wire. We test for proper voltage, check for reversed polarity which can destroy sensitive electronics, and verify that the grounding wire is actually connected. Replacing a faulty switch or outlet is a fast, inexpensive repair when caught early.

We rip out the old devices, strip back the wire to clean copper, create secure pigtail connections, and install commercial-grade receptacles that deliver clean, consistent power. Sometimes this process reveals deeper issues that require Electrical Wiring & Rewiring to fully resolve.

Stop living with dead wall plugs and let our Electrical Outlet & Switch Repair team restore your connections.

How Jackson Total Service Handles Your Electrical Needs

When you call Jackson Total Service, you aren't getting a high-pressure sales pitch. You are getting a family-owned company that has been keeping Southwest Florida homes safe and comfortable since 1964. We hold state electrical license EC13002992, meaning our technicians are rigorously trained, vetted, and qualified to handle everything from a simple switch replacement to a total home rewiring.

Because we offer real 24-hour emergency service, you can call in the middle of the night with a sparking panel — our after-hours service takes your details and a member of the Jackson team calls you back within 20 minutes. Our approach is built on thorough diagnostics and transparent communication.

When our electrician arrives, they don't just look at the one dead outlet. They check the circuit load, test the panel connections, and ensure the root cause is identified. We explain exactly what has failed in plain English and provide upfront pricing before any tools come out, leaving your home safer than we found it.

Comprehensive Home Comfort Solutions

Electrical systems are the backbone of your home, and they frequently intersect with other major comfort systems. Because our team is licensed across multiple trades, you only have to make one call to solve multiple problems. If you want to keep your lights on during the next grid failure, our electrical team works hand-in-hand with our generator specialists for seamless Generator Installation & Replacement.

We also coordinate directly with our HVAC and plumbing divisions. Whether you need a panel upgrade to handle the heavy pull of an AC Repair & Service visit, or you need power routed for a new water heater after a Leak Detection & Repair call, we handle the entire project under one roof. One team, one schedule, total home comfort.

Get Your Electrical System Running Safely Today

You shouldn't have to live with flickering lights, dead wall outlets, or the constant anxiety of a breaker panel that keeps tripping. Electrical problems don't fix themselves—they only degrade further, turning minor repair costs into major safety hazards.

Let the team that has served Southwest Florida for over six decades restore the safety and reliability of your home's power. Contact us today to schedule your electrical service with Jackson Total Service.

Get started

Ready for electrical services?

Describe the problem — cooling, plumbing, or electrical — and the Jackson dispatch desk sends the right licensed technician, not a referral.

Call the family line(239) 643-0923Day or night, storm or Sunday — since 1964.
Request service

Put it on the board

No obligation, no spam. Your request goes straight to our Naples dispatch desk.

“They repaired what both the power company and the cable company couldn't or wouldn't. Thank you all for keeping me safe and sane.”
Ellie TracyElectrical outlet & switch repair

Schedule Service

Describe the problem and pick the trade — one dispatcher routes it to the right Jackson technician, whether it's air, water, or power.

Loading form. If it does not load, please use the other contact options on this page.

By submitting, you agree to our Privacy Policy and Terms. If you opt in to texts, message & data rates may apply and you can reply STOP to opt out.

Call Now Request Service